How do you reset the transmission on a Hyundai Elantra?

Using a Hyundai GDS, select the VIN and A/T menu. From the main screen, select the “Option Treatment.” Select “Resetting Auto T/A values” and follow the screen prompts. Turn the ignition key off for 10 seconds. After the adaptive values have been reset (erased), and adaptive learning procedure must then be completed.

How do I reset my adaptive transmission?

Procedure Reset Transmission Adaptive Learning DIY

1. Turn the key to position 2. You should see all the dash lights come on.
2. Press the gas pedal all the way.
3. Wait.
4. Turn key to OFF, position 0.
5. Release the gas pedal.
6. Wait 2 minutes.
7. Start the car and drive.

Do you have to program a new transmission?

On many vehicles, any time a new transmission is installed, it must be programmed initially before use, and most vehicles that require this won’t shift at all prior to being plugged into specific software.

What happens if you don’t reprogram transmission?

If your computer needs reprogramming or rebooting, your transmission may start acting up. Automatic transmissions are tied to sensors and solenoids that communicate with your car’s computer. As the bands and clutches in the transmission wear out, this communication can break down.

How long does it take to reprogram a transmission?

If you take your vehicle to a repair shop that has the right tools and the information from the manufacturer, the process takes about 30 minutes to complete. Reprogramming a transmission shouldn’t take very long.

How do you relearn an automatic transmission?

Procedure Reset Transmission Adaptive Learning DIY

1. Turn the key to position 2. You should see all the dash lights come on.
2. Press the gas pedal all the way.
3. Wait.
4. Turn key to OFF, position 0.
5. Release the gas pedal.
6. Wait 2 minutes.
7. Start the car and drive.

How long does it take for a transmission to relearn?

Any time a battery is disconnected, or in your case a transmission is replaced, it can take up to 90 days for the engine and transmission computer to relearn your driving habits. It’s normal for an automatic transmission not to shift into higher gears until the engine coolant temperature is at a specified temperature.