Tricks and tips for everyone


What are pg threads?

What are pg threads?

The PG stands for Panzer-Gewinde . This is a German type thread. The Main difference on this vs NPT and Metric is that the depth of the thread is smaller but has a larger flank angle, which makes it have a wider pitch along with a straight thread.

What is NPT Adaptor?

NPT Connections NPT (National Pipe Thread) seals are the most popular type of seal for pressure calibration systems in the U.S. and Canada. NPT male adapters have a taper thread that wedges into the female NPT adapter.

What is a threading adapter?

Thread adaptors convert between English and Metric threads, as well as male and female, in a selection of standard sizes. Add same or smaller sized threads to clearance holes. Adapt threaded holes for different sizes or unit system.

What size is PG?

Panzergewinde sizes are named with the prefix PG plus a nominal number which approximately corresponds to the maximum cable diameter (in millimeters) that can be passed through the conduit. Because the walls of the conduit are usually relatively thin, the thread depth is limited. Thus a thread angle of 80° is used.

What is the difference between MPT and NPT?

MPT and FPT are both sub-types of NPT. National Pipe Threads (NPT) have tapered threads….

Definition of Pipe Thread Acronyms
NPT National Pipe Thread (tapered)
FPT Female Pipe Thread (interchangeable with NPT)
FIP Female Iron Pipe (interchangeable with NPT)
MPT Male Pipe Thread (interchangeable with NPT)

What is a PG 16 thread?

Pg Thread DIN 40430 Steel Conduit Thread

For cable diameter mm Thread Size Tapping Drill Size
Pg 16 22.5 M 20
Pg 16 22.5 M 25
Pg 21 28.3 M 25
Pg 21 28.3 M 32

Are MPT and NPT threads compatible?

MPT Male Pipe Thread (interchangeable with NPT) National pipe thread connection to an FPT (Female Pipe Thread) or equivalently an FIP (Female Iron Pipe).

Related Posts