What engine is on Mantis Tiller?
What engine is on Mantis Tiller?
Honda® 4-cycle engine
Powered by an easy starting Honda® 4-cycle engine and combined with specially designed tines, this tiller matches the performance of a big, front-tine tiller but is easier to use! Breaks through sod, compacted soil and hard clay.
How can I tell what model my Mantis tiller is?
The model number on a Mantis tiller can be found on a white label, located on top of the engine housing. The model number will be located at the bottom of the label in the “Item#” field.
Is a tiller a 2 cycle engine?
The mini tiller that makes gardening faster and easier than you ever dreamed!…Specifications.
| Engine | 2-cycle (gas/oil mixture in tank) 21.2cc |
|---|---|
| Tine Speed | Up to 240 rpm |
| Grips | Over-molded Sure-Grip comfort grips |
Why is my Mantis Tiller won’t stay running?
Mantis Small engine stops after a few seconds This sticky fuel can clog up the carburetor and cause the engine to stall. If the carburetor is clogged, try cleaning it with carburetor cleaner. If cleaning the carburetor isn’t effective, rebuild or replace the entire carburetor. The carburetor might be clogged.
How do I adjust the idle speed on my Mantis tiller?
The Mantis tiller carburetors are adjusted using a red and a white screw located behind the air filter cover near the black choke button on the right side of the engine. The red screw adjusts the high-speed setting and the white screw controls the low-speed setting.
Do tillers use regular gas?
The engines in these tillers run on unleaded gasoline. Oil is added separately and is not mixed with the fuel.
How do you start a Honda Mantis tiller?
Open the choke completely by pressing the plunger all the way in against the carburetor housing. Crank with the starter cord again and the Mantis two-cycle tiller should run. Let the engine warm up two or three minutes before tilling.
