What is a 15/16 equivalent to in metric?
What is a 15/16 equivalent to in metric?
24mm
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 1/2″ | 19mm | 3/4″ |
| 9/16″ | 21mm | 13/16″ |
| 22mm | 7/8″ | |
| 5/8″ | 24mm | 15/16″ |
What is a 15/16 wrench in millimeters?
15/16 inches =23.81mm inches to mm conversion SPANNER – YouTube.
Is 15 16 The same as 21mm?
21mm = just over 13/16 inch. 22mm = almost 7/8 inch. 23mm = 29/32 inch. 24mm = just over 15/16 inch.
What does a 15/16 socket convert to?
Standard / Metric Wrench Conversion Chart
| Bolt Diameter | Standard | Metric |
|---|---|---|
| 9/16″ | 13/16″ | 21mm |
| 7/8″ | 22mm | |
| 5/8″ | 15/16″ | 24mm |
| 1″ | 25mm |
What is a 36mm socket in standard?
36mm. 1.418. 1 7/16 AF. 1.480. 7/8 Wworth; 1in BSF.
What size is 36mm in SAE?
Wrench Size And Conversion Table
| Inches | Millimeters | Spanner |
|---|---|---|
| 1.417 | 36mm | 36mm |
| 1.418 | 1 7/16 AF | |
| 1.480 | 7/8 Wworth; 1in BSF | |
| 1.500 | 1 1/2 AF |
What’s 36mm in standard?
A 36mm socket is 1 7/16″ in standard(SAE) size, almost.
What is 16mm Imperial?
16mm. 5/8 Inch. 0.62992 Inches. 17mm. Just short of 11/16 Inch.
What is a 15 mm wrench in standard?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 9/16″ | 0.563 | |
| 15mm | 0.591 | |
| 19/32″ | 0.594 | |
| 5/8″ | 0.625 |
Do you have more metric or standard wrenches in your wrench?
And for our international readers, you likely have more metric wrenches in yours. Whatever the case may be, our wrench conversion chart will give you the best-fitting standard or metric wrench for a given bolt size. Unlike screws, nuts & bolts are less prone to stripping when being fastened with a substitute wrench.
What are the wrench sizes in order?
Here are the Wrench Sizes in Order in Standard (SAE) and Metric inch: Standard Combination Wrenches: 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1,
What is a 45 degree ratchet wrench?
A ratchet mechanism allows you to turn fasteners in tight spaces without removing and repositioning the wrench. The heads are offset 45° to provide clearance for reaching over obstructions. These wrenches are polished for a mirror-like finish.
What are the different types of combination wrenches?
Standard Combination Wrenches: 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, Metric Combination Wrenches: 4, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 36, 64,
