Tricks and tips for everyone


What speed should my Telstra cable internet be?

What speed should my Telstra cable internet be?

Typical speeds. 12Mbps typical download and 0.8Mbps typical upload speeds between 7pm-11pm.

How can I speed up my Telstra internet?

  1. Restart your modem, devices, and nbn connection box (if you have one)
  2. Pause any data intensive activities, such as downloading or streaming.
  3. Disconnect other devices connected to the network.
  4. If you are connecting via Wi-Fi: Disconnect and reconnect to the Wi-Fi network.
  5. If you are connecting via Ethernet cable:

Is Telstra cable faster than NBN?

The biggest difference between cable broadband and NBN is upload speed. Customers on an NBN 100 plan will be able to upload at speeds of 40Mbps, whereas cable broadband upload speeds can be as low as 2Mbps. It’s also worth noting that cable can be more prone to congestion than NBN services.

Why is my Telstra speed so slow?

Actual speeds may vary, including due to your location/equipment/ software, data source, and internet traffic. Speeds may be slower when your devices are connected by Wi-Fi rather than Ethernet cable or if you’re a Telstra Air member and you’re using your home broadband service at the same time as a hotspot user.

What Internet speed is cable?

100-300 megabits per second
Cable wires deliver a faster connection than DSL. Typically, download speed of cable Internet ranges from 100-300 megabits per second.

Does Telstra smart modem work with cable?

PLEASE NOTE: YOU DO NOT NEED TO HAVE A WORKING INTERNET CONNECTION TO CONNECT TO THE WI-FI OF THE SMART MODEM OR ACCESS THE MODEM GATEWAY PAGE. Alternatively, you can plug in an RJ-45 Ethernet cable from your computer or laptop to one of the four (4) yellow LAN ports on the back of the Smart Modem.

How can I increase my Ethernet speed?

8 Troubleshooting Tips For a Slow Ethernet Connection

  1. Restart Your Computer.
  2. Restart Your Network Adapter.
  3. Use the Network Adapter Troubleshooter.
  4. Restart Your Router.
  5. Try a Different Port on Router or Switch.
  6. Scan for Malware.
  7. Change the Ethernet Cable.
  8. Disconnect Any VPN Software.

What speed should my cable Internet be?

The FCC says the best ISPs for two or more connected devices and moderate to heavy internet use should offer at least 12 megabits per second (Mbps) of download speed. For four or more devices, 25 Mbps is recommended.

Will Telstra cable be switched off?

The majority of existing landline and internet services will be disconnected in the future. Most services that are supplied over Telstra’s copper and cable broadband networks will be disconnected.

Why is my Telstra internet so bad?

You might just need to jump up a speed tier and get a faster NBN plan. Too many devices. Having too many devices connected at once can not only eat up your bandwidth, but also cause interference between Wi-Fi signals, worsening your connection. Check if your connection improves when there’s only 1-2 devices connected.

Related Posts