Tricks and tips for everyone


How do I connect my HP LaserJet P1505 to my laptop?

How do I connect my HP LaserJet P1505 to my laptop?

HP LaserJet P1505 and P1505n Printers – Setting Up the LaserJet (Hardware)

  1. Unpack the printer.
  2. Check the contents of the box.
  3. Install the print cartridge.
  4. Connect the power cord.
  5. Turn on power.
  6. Load plain paper.

Is HP LaserJet P1505 a color printer?

The HP LaserJet P1505 Printer is a monochrome laser printer with output speeds up to 24 pages per minute (ppm) and can put its first page out in less than 6.5 seconds for a letter size document (from PowerSave mode).

How do I reset my HP 1505?

What we finally figured out on how to reset the network config was:

  1. Turn off the printer.
  2. Hold the “GO” and “Cancel” buttons at the same time.
  3. Press and release the power button while still holding the “Go” and “Cancel” buttons.
  4. Release the “Go” and “Cancel” buttons after about 6 seconds after you press the power button.

Is HP LaserJet P1505 Windows 10 compatible?

Requirements: Operating System – Windows 7, Windows 8, Windows 8.1, Windows 10.

How do I use my HP LaserJet P1505?

How do I clean my HP LaserJet P1505?

Make sure that the printer is idle and the Ready light is on. Load the transparency or paper in the input tray. Print a cleaning page….Print a cleaning page.

  1. Access the product Properties dialog box.
  2. Click the Device Settings tab.
  3. In the Cleaning Page section, click Start.
  4. Click OK to begin the cleaning.

How do you clean dust out of a printer?

To clean your printer, you need rubbing alcohol, a cotton swab, a vacuum cleaner or canned air, and a clean cloth. If you see streaks or the paper is smeared, clean the platen or roller to remove built-up ink. Then use the vacuum cleaner or canned air to remove any remaining ink or dust particles from the printer.

Related Posts