Tricks and tips for everyone


How do you anchor a concrete ceiling?

How do you anchor a concrete ceiling?

Simply drill a hole into the concrete, hold the fixture you’re fastening over the hole, then use a hammer to tap the anchor into the hole. As you drive in the pin, the sleeve expands outward, trapping the anchor in the hole.

What anchors for concrete ceiling?


  • Plastic anchors, or conical anchors, insert directly into the pre-drilled hole.
  • Hammer-set concrete anchors are light-duty anchors that DIYers can use to secure wood and other materials to solid concrete.

How do you repair a hole in a concrete ceiling?

You will need an epoxy-based concrete repair compound, particularly one that bonds more slowly. After injecting the compound into the crack, smooth the surface with a putty knife. Do not be shy about adding more compound to the crack, as you need to be sure that the crack is being filled. Cover the repair as it cures.

Can I drill into a concrete ceiling?

Set up the overhead drill press. Secure the drill into the press and then raise it until the bit almost touches the ceiling. Move the overhead press to line the drill bit up with your mark and then lock the wheels in place to prevent movement while drilling. Raise the drill again until the bit touches the ceiling.

Can Plastic anchors be used in concrete?

Wall anchors can be used in drywall, concrete, brick, metal or wood, and installation takes just a few steps. Plastic wall anchors are useful for hanging lightweight pictures and small decorative objects. Keep the weight of the object under 30 lbs. or the anchor may pull out of the wall.

How do you replace a concrete anchor?

The anchor can be patched over or just left in place. Lag Shield Anchors: These anchors require the insertion of a lag screw that expands the lag shield anchor. Sometimes, simply removing the screw may reverse the expansion of the anchor. Or, the anchor can be removed simply by pulling it out of the hole.

How do you fill a large hole in concrete?

How to fill a Large Hole with Concrete

  1. Step 1: Use a hammer and a cold chisel to level the bottom of the hole.
  2. Step 2: Brush on a concrete bonding liquid.
  3. Step 3: While the bonding agent is still tacky, mix the concrete.
  4. Step 4: Level the patch.

How do you hang something heavy on a concrete ceiling?

Fortunately, there are several ways to go around this, so keep reading to find out what they are.

  1. Use Adhesive Wall Hooks for Lightweight Objects.
  2. Use a Powder-Actuated Tool for Angle Clips and Pins.
  3. Use Hardwall Hangers on Concrete.
  4. Use Tape Only on Smooth Surfaces.

Related Posts