What is rift cut white oak?
What is rift cut white oak?
Rift-Sawn White Oak is similar to Quarter-Sawn, but with the angle of the cut changed slightly so that fewer saw cuts are parallel to the medullary rays, which are responsible for the flake effect. This positions the growth rings between 30- and 60-degree angles to the face of the board.
What is rift sawn plywood?
Rift Sawn White Oak Plywood comes in 4′ x 8′ Sheets available in 1/4 inch and 3/4 inch thickness. Rift Sawn White Oak Plywood has heartwood that is a light to medium brown, commonly with an olive cast. Nearly white to light brown sapwood is not always sharply demarcated from the heartwood.
What is the difference between rift sawn and quarter sawn white oak?
QUARTER SAWN WHITE OAK WILL CONTAIN STRIKING MEDULLARY RAY FORMATIONS, COMMONLY CALLED “RAY” OR “FLAKE”. RIFT SAWN IS SIMILAR TO QUARTER SAWN, BUT WITH MUCH LESS OCCURENCE OF MEDULLARY RAY FORMATIONS. PLEASE NOTE THAT WIDER PLANKS OF RIFT-SAWN WILL DEVELOP QUARTER SAWN GRAIN (TREES ARE ROUND!).
How much does rift sawn white oak cost?
$11.99 /Board Feet
|1-99||$11.99 /Bd. Ft.|
|100+||$8.99 /Bd. Ft. (25% off)|
Is rift sawn better than quarter sawn?
Due to the position of the growth rings in the cut, Quarter Sawn lumber is more dimensionally stable than Plain Sawn. It resists expansion and contraction on plank’s width. Rift Sawn lumber is the most elite of the cuts.
Is rift oak white oak?
Rift planks are cut from quartered white oak logs in a tilted process making every cut perpendicular to the annual growth rings. This process yields the distinctive striped grain pattern, but means only about 40% of any log is used to create planks.
Is rift sawn more expensive?
Each of these boards is cut radially perpendicular to the growth rings of the tree. There are large triangles of waste left from between each board. As a result, rift sawn lumber is costly to produce and therefore, the most expensive type of planks available from a log.
Does rift sawn oak have knots?
Another way to change up the look of a quarter and rift sawn wood floor is to use a grade with character markings like the floor shown below. Rift and quartersawn White Oak with knots, character markings, and skip planing has a vintage look and feel.
Is there a shortage of white oak?
While there’s no shortage of white oak trees across the country – one source said there’s an estimated 5.2 billion in the U.S. – there is a shortage of loggers to cut the trees, as well as mills to turn them into the raw wood necessary for barrel-making or cooperage.
Is rift sawn expensive?
By far, rift sawn lumber is both the most expensive and least common option on the market. Here, the annular rings look best at 45 degrees but can fall anywhere between 30-60 degrees.