How do I turn off my DSC smoke alarm?
How do I turn off my DSC smoke alarm?
How Do I Disarm My DSC Alarm System?
- Disarm from the panel. To disarm from the panel, simply enter in a valid user code or the Master Code.
- Disarm with a key fob. To disarm using a key fob simply press and hold the disarm button on a programmed key fob while within range of the system.
- Disarm through Alarm.com.
How do I set the time on my DSC maxsys?
Tech Tips: Change the Time & Date on a DSC Maxsys 4020 Commercial Security Alarm System Keypad
- Enter your system’s master code on your system’s keypad, then press 9 (If you do not know your system’s master code, call FMC’s Service Department)
- Press the < or > arrow keys to scroll until the Keypad says “Set System Time”
What is a partition in an alarm system?
A partition refers to a sectioned-off division of an alarm system that can be operated independently from the rest of the system. On a partitioned system, only the zones associated with the partition will be affected.
How do I partition my DSC alarm?
- Step 1 – Partition 2 Enable. To enable Partition 2, turn Option [1] ON in Section [201].
- Step 2 – Partition 1 Zone Enable. At default, zones 1 – 8 are enabled on Partition 1.
- Step 3 – Partition 2 Zone Enable. To enable a zone on Partition 2, turn ON the appropriate option in the correct Section.
Why is my DSC alarm beeping?
That infernal beeping is likely happening because your alarm panel has detected one or more trouble conditions. Some common beep-inducing issues include low battery indications, battery failure, phone line failure, and communication issues. Before you do anything, make sure that your system is disarmed.
How do I change the time on my DSC alarm?
Time & Date Programming In the event that you need to reset the time and date on your keypad, press [*] [6] [Master Code], then press [1] to select Time and Date. Enter the time in 24 hr format (HH:MM) followed by the date (MM:DD:YY). Press # to exit programming.
