How do you fix standby mode on a TCL TV?

Press the right arrow button and select Power. Press the right arrow button and select Standby LED. Press the right arrow button and select Off. Press the button to confirm.

How do I fix my TV from standby mode?

Standby mode is a power-on issue, so be sure your remote control is working properly. Every few months, check its batteries. Verify that both negative and positive ends are installed properly. Replace both batteries at the same time, even if just one is damaged.

How do I turn off standby light on TCL TV?

How Do I Turn Off My TCL Standby Light?

1. Go to your “home settings” by pressing the “home button” on your TCL remote control.
2. Scroll down, and select the “Settings” option.
3. Select the “System” option.
4. Select the “Power” option.
5. Select the “Standby LED” option.
6. Toggle it off.

Does a TCL TV have a reset button?

Use the steps below to perform a factory reset on an Android TV: From the TCL Android TV remote control, press the Settings button. Scroll to More Settings > Device Preference > Reset. Select Factory data Reset on the Factory data Reset warning screen.

Why does my TCL TV turn off by itself?

Check If the Sleep Timer Is On First, check if your TV sleep timer is toggled on. If it’s toggled on, switch it off. This would stop your TV from automatically turning off during use.

How do I get my TCL TV out of power save mode?

TCL 10 5G UW – Turn Power Saver On / Off

1. From a Home screen, swipe up to access all apps.
2. Navigate: Settings. Smart Manager. .
3. Tap. Battery. .
4. Tap the one of the following to turn on or off : Normal saving mode. Super saving mode.
5. Tap. Battery detail. .
6. Tap the. Batter saver switch. to turn on or off.

What causes standby mode?

Modern Standby starts when the user causes the system to enter sleep (e.g user pressing the power button, closing the lid, idling out, or selecting Sleep from the power button in the Windows Start menu). On entry to Modern Standby, apps and system software must be made ready for the transition to low-power operation.

Why does TV go on standby?

Standby mode is like putting your TV to sleep without fully turning it off. It allows it to turn on much more quickly than if fully powered down, meaning the results of that button press is almost instantaneous and you’re not going to miss the start of The X Factor.

What is standby mode on TV?

Most televisions are automatically in standby mode if they are plugged in. Basically, the TV is asleep, but it isn’t powered down. Standby mode can be an energy-saving feature in some circumstances. For instance, a TV that’s in standby mode can power itself down if there’s no activity for a certain period of time.

Why is the light on the bottom of my TCL TV blinking?

A TCL TV light blinking means that your TV is stuck in standby mode. To fix it, find the small reset button on the back of your TV. Use a paperclip or pen to press/hold the reset button for 10 seconds.

How do I reboot my TCL TV?

To restart your TV, follow the step-by-step instructions below:

1. Press the Settings button on your remote control.
2. Select More Settings > Device Preferences > About > Restart.
3. Select Restart to confirm.