How much is it to get suspension Revalved?

$500 is about right for springs and revalve of both ends. Now add in seals, bushings and anything else deemed a wear part, the shops own parts and you can easily push the $1000 mark.

What is a suspension Revalve?

At Factory Connection, the term “Revalve” means the modifying of the suspension component to improve the performance to better suit the riders skill set and needs.

What is racetech?

Race Tech Suspension has over 36 years of creating hi-performance suspension solutions for motorcycles, ATVs, UTVs, and snowmobiles. RT specializes in revalving stock suspension components using proven Gold Valve Kits that can be user or dealer installed. RT can rebuild most stock and aftermarket suspension components.

How do I stop my rider from sagging?

Add preload to reduce the sag and remove preload to obtain a higher rider sag figure. One full rotation of the preload adjuster on the front fork usually changes the sag by 1mm. 10. Repeat the measurements and check that the preload adjustment has had the desired effect.

How much does Pro Circuit suspension cost?

WHAT’S THE SQUAWK? The price is exorbitant. At over $7000, this is not a purchase that can be taken lightly, nor is it one that short-circuits the age-old conundrum that the suspension still has to be valved perfectly to work perfectly.

What do racetech gold valves do?

Gold Valves® are Race Tech’s Custom Valving Kits. They are designed to break through the limitations of stock piston designs. Research has shown that the stock piston ports induce unnecessary harshness. Gold Valves are designed to reduce piston restriction so harshness is dramatically reduced.

Should I Revalve my dirt bike suspension?

The reason to revalve your suspension is to customize it so it works perfectly for you. As an example, if you push the front end really hard into corners on the track, you’ll want a stiffer fork valving.

How much does it cost to rebuild a fork on a dirt bike?

Cost: $150 – $400 Motorcycle shops and dealers costs vary greatly depending upon where you live geographically but from the feedback we hear from our customers is they were quoted as low as $150 and as high as $400 to have a shop fully remove the forks and replace the fork seals.

Are Race Tech Gold Valves good?

If you race or simply want the best, Race Tech’s Rebound Gold Valves are the solution to improved traction. Used by major factory teams, these valves increase flow area, putting valving control on the shim stack instead of the piston. This results in outstanding tuneability, improved control and traction.

When should I adjust my high speed compression?

If you find that your fork or shock is still bottoming out too easily and have a high-end shock and fork with the option, you can adjust your high-speed compression damping. Adding more high-speed compression damping reduces the amount of travel the fork uses in high speed impacts (shaft speed not bike speed).