What is light cycle oil?
What is light cycle oil?
Light cycle oil (LCO) is a diesel boiling range product from fluid catalytic cracking units. However, LCO is a poor diesel fuel blending component without further processing.
Is light cycle oil the same as light crude oil?
Light Cycle Oil (LCO) is a diesel boiling range product from Fluid Catalytic Cracking Units (FCCUs). However, LCO is a poor diesel fuel blending component without further processing.
What is desulfurization of crude oil?
Desulfurization is the process of removing sulfur from crude oil (or its fractions). It prevents contamination and also improves the efficiency of petroleum. Desulfurization removes elemental sulfur and its compounds from solids, liquids and gases.
What is LCO used for?
LCO (Lithium cobalt oxide) was invented in the year 1991. Its anode material is LiaC6, the cathode material is LibCoO2 and the carrier is Li+.It is used in various applications ranging from electronic devices to all laptops and phone batteries.
Why is light crude oil more expensive?
Light crude oil receives a higher price than heavy crude oil on commodity markets because it produces a higher percentage of gasoline and diesel fuel when converted into products by an oil refinery.
What reactor is used for desulfurization?
fixed bed catalytic reactors
Desulfurization reactions take place in fixed bed catalytic reactors (∆R) where a minimum ratio H2/hydrocarbon must be ensured for catalyst maintenance reasons.
How do you remove sulphur from oil?
The removal of organosulfur compounds from crude oil is an important aspect of all countries to reduce air pollution. The sulfur compounds from gasoline are generally removed by treating it with an alkaline solution sodium plumbite.
Where are LCO batteries used?
Lithium cobalt oxide (LCO) batteries are used in cell phones, laptops, tablets, digital cameras, and many other consumer-facing devices. It should be of no surprise then that they are the most common type of lithium battery.
What is oxidative desulphurization (ODS)?
Basically, oxidative desulphurization (ODS) is a two-stage process of oxidation and liquid extraction of the oxidized sulphur compounds. Oxidation is carried out in the presence of an acid catalyst and converts original sulphur into the corresponding sulphoxides and sulphones.
What is light cycle oil (LCO)?
Light Cycle Oil (LCO) is a diesel boiling range product from Fluid. Light Cycle Oil (LCO) is a diesel boiling range product from Fluid Catalytic Cracking Units (FCCUs). However, LCO is a poor diesel fuel blending component without further processing. Oil refining is an industrial process which involves separation, conversion and finishing.
How to produce low sulphur environment friendly diesel?
LCO is treated in the diesel hydrotreater (DHT) unit to produce low sulphur environment friendly diesel. Production of LCO is increased in the FCCU by employing medium conversion mode rather than using traditional low conversion mode.
How to recover LCO from slurry oil?
Slurry oil contains LCO boiling range material in it; hence a separate slurry oil stripping tower is employed to recover the LCO from slurry oil. The control of Fluid Catalytic Cracking Unit is complicated as it involves numerous parameters to be monitored and controlled.